×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • The main sources of negative impact on the environment during the construction and operation of gas distribution systems

    When operating gas distribution systems, the process of releasing various gases into the atmosphere is inevitable, negatively affecting the environment and creating a greenhouse effect. These gases can be either products of combustion of gaseous fuel or the result of natural gas leaks from gas pipelines and equipment. The main articles of gas leaks from gas pipelines and ways to minimize the negative impact on the environment are given.

    Keywords: gas distribution system, greenhouse effect, gas combustion, methane, flanged and threaded connections, leaks, safety relief valve

  • Organizational and technological solutions for eliminating cracks in reinforced concrete foundation slabs

    In order to negate the loss of strength, that can lead to collapse of constructions, we should take measures to prevent cracking. Every crack emersion in reinforced concrete indicates that the accumulated stress has been released in this area of the structure. The cause of cracks are internal tensile stresses that can occur due to internal processes in the element and from external loads on the structure. It is possible to eliminate cracks that have already appeared with the help of repair compounds that fill the volume of cracks in various ways. Injection, as one of the solutions, will help to maintain the strength and durability of the structure.

    Keywords: cracking, concrete, reinforced concrete slab, crack, defect, deformation, strength, soil, repair compound, foundation, foundation slab, injection

  • Modification of the algorithm for correcting errors that occur during the operation of the satellite authentication system

    The prospects for building a satellite Internet based on a low-orbit constellation of satellites (LOСS) are due to the fact that only it allows for stable and reliable communications anywhere on the planet. Therefore, the technology of satellite industrial Internet of things IIoT has become widespread in the oil and gas industry, many of whose facilities are located in the Far North. However, when using satellite low-orbit Internet (SLOEI), new threats and attacks arise against it. Among attacks on LOCS, a special place is occupied by attempts to impose unauthorized content on SLOEI subscribers. This situation can be prevented using a satellite identification system. For the effective operation of the “friend or foe” challenge-response system for LOCS, a copy-resistant authentication protocol with zero knowledge disclosure was developed. This property was achieved by reducing authentication time through the use of modular deduction class codes (MDCC). The use of parallel VDCC codes has led to a change in the method of satellite identification, which entails a revision of the principles for constructing a request-response system. Therefore, the development of a block diagram of a satellite identification system operating in the MDCC for a low-orbit satellite Internet system is relevant.

    Keywords: imitation resistance, zero-knowledge authentication protocol, modular codes of residue classes, block diagram of the low-orbit satellite identification system

  • Construction of new church buildings - style preferences

    The article is devoted to the issues of new construction of Orthodox temple facilities and complexes. This process is considered on the example of the St. Petersburg experience of carrying out work on the revival of the spiritual heritage of the city. The construction of new churches challenges architects to choose between the established canons of church construction adopted in the past and the realization of their creative and spiritual priorities, as well as a stylistic response to the task. This allows us to state the various decisions of the temples, despite their common canonical context. The purpose of the article is to study the stylistic trends of the new church architecture: their correspondence to the context of the selected location, the surrounding development.

    Keywords: St. Petersburg, Orthodox temple architecture, history of church construction, objects of religious architecture, architecture, shaping, new construction of temples, stylistic solutions

  • Determination of geometric parameters of pits when laying polyethylene gas pipelines using horizontal directional drilling

    The use of closed methods for laying underground polyethylene gas pipelines using horizontal directional and directional drilling methods when crossing artificial and natural obstacles is considered. The results of calculating the geometric parameters of the working and receiving pits when laying polyethylene gas pipelines using a closed method using horizontal directional drilling are presented.

    Keywords: polyethylene gas pipeline, closed installation method, horizontal directional drilling, directional drilling, dimensions of working and receiving pits

  • Analytical model of the method of variable elasticity parameters for flange beam to column connections

    The article is devoted to the study of flange beam to column connections to analyze their nonlinear behavior. In the course of the study, a simplified analytical model was created using the method of variable elasticity parameters to determine the stress-strain state of these connections. The proposed mechanical model makes it possible to predict the strength, stiffness, ductility of joints, as well as possible types of fracture and deformation mechanisms of the bent elements of flange joints. This model can be useful for engineers and specialists in the field of design and analysis of civil structures. The proposed refined component model is an analogue of the Eurocode 3 model. The paper presents a numerical experiment on modeling the junction of a beam with a column by the finite element method. A comparative analysis of the results obtained with the results of tests of flange connections of steel building structures performed by the University of Sydney (USYD) is presented.

    Keywords: flange connections, flange plate, stress-strain state, method of variable elasticity parameters, component method, refined component model, finite element method, elastic-plastic state, plastic hinge, modified stiffness, bending model of flange plate

  • Modification of the algorithm for correcting errors that occur during the operation of the satellite authentication system

    Frequency multiplexing (OFDM) methods have become the main basis for most outbred systems. These methods have also found application in modern systems of low-orbit satellite Internet (LOSIS). For example, the StarLink system uses OFDM transmission systems that use a signal frame consisting of 52 channels to transmit data. One way to increase the data rate in OFDM is to replace the Fourier transform (FT) with a faster orthogonal transform. As such, the modified wavelet transform (MWT) of Haar was chosen. The Haar MVP allows to reduce the number of arithmetic operations during the orthogonal signal transformation in comparison with the PF. The use of integer algebraic systems, such as Galois fields and modular residue class codes (MCCR), makes it possible to increase the speed of a computing device that performs orthogonal transformations of signals. Obviously, the transition to new algebraic systems should lead to changes in the structure of OFDM systems. Therefore, the development of structural models of an OFDM transmission system using the Haar MWP in the Galois field and the ICCM is an urgent task. Therefore, the aim of the work is to develop structural models of wireless OFDM systems using a modified integer discrete Haar transform, which can reduce the execution time of the orthogonal signal transformation. And this, in turn, will lead to an increase in the data transfer rate in the SNSI.

    Keywords: orthogonal frequency multiplexing, modification of the Haar wavelet transform, structural models of execution of the Haar MVP, Galois field, modular residue class codes

  • Study of the influence of impurities on the ballistic conductivity of ε-phosphorene

    The effect of impurities on the conductivity of the allotropic modification of phosphorene (ε-P) was studied. The quantum chemical research package Quantum Espresso was used for calculations. The study was conducted on the basis of simulation modeling. Three-dimensional structures are modeled using Quantum Espresso. The work adapted the model for two-dimensional ε-phosphorene by choosing a unit cell vector so large that interaction between the layers was possible. It has been shown that S has the smallest changes. Significant changes in conductivity can be achieved by placing F in various configurations relative to the crystal lattice, which can be actively used to create differetnt types of detectors.

    Keywords: phosphorene, allotrope, semiconductor, impurity, adsorption, conductivity, density functional theory, modeling, Quantum Espresso, crystal structure

  • Automatization system for holding rolling stock

    Digital twins of railway stations are necessary for planning work and taking the most effective management actions. An important factor is the compliance of the planned time costs with the actual ones. One of the tasks that are difficult to formalize at railway stations is the process of holding the rolling stock. This is due to the fact that the holding time depends on the human factor and the holding rolling stock. To create an automated station controlled by a digital twin, it is necessary to develop an automated holding system. One of the tasks in developing such a system is the problem of device location. This problem can be formulated as follows: it is necessary to place the minimum allowable number of holding devices in the controlled area in such a way that reliable holding is provided for any configuration of the rolling stock. As a tool for solving this problem, the most effective will be the use of methods of genetic algorithms. In this article, the authors consider the relevance of this study and the relevance of automating the holding of rolling stock.

    Keywords: digital railway station, automation, brake shoes, UTS-380, DUZS, traffic safety.

  • Analysis of the stability of the technological system for the production of caramel

    The paper considers the operator model of the technological system for the production of caramel, assesses the stability of the subsystems and the content of the technological system. For a consistently stable caramel formation subsystem using the Shewhart map under specific production conditions, an analysis of the stability of the subsystem was carried out.

    Keywords: operator model, subsystem, system integrity, process stability, control charts, average values, range

  • Improving the performance of road surfaces by using lime-containing components as part of mineral powders

    The main problems of wear of the upper layer of asphalt concrete pavement during intensive use, from the wheels of the vehicle, the roadbed of public roads are considered. The task is to increase the strength characteristics of road pavements from hot mix asphalt, taking into account the use of lime-containing components in the composition of the mineral powder. To achieve this goal, the factors influencing the increase in the operational parameters of road surfaces are considered. The use of lime-containing components with high chemical activity is substantiated. The physical and chemical properties of lime form a structured layer of bitumen in the zone of contact with mineral substances, which is resistant to the aging process. There is an increase in strength and water resistance due to the high adsorption capacity and chemical activity of lime-containing components. During intermolecular interaction in the contact zones of calcium oxide grains with an organic binder, a coagulation-condensation structure is formed. Crystallization structures are shaped like crystals and evenly distributed in the mixture before the formation of the asphalt concrete pavement, which leads to increased strength and shear resistance. According to the results of experimental studies, the road surface is characterized by increased strength and water resistance. A conclusion was made about the effect of the use of lime in the composition of mineral powders on the performance properties of road surfaces.

    Keywords: asphalt concrete coating, performance indicators, strength, water resistance, structure formation, lime, calcium oxide

  • Development of an automated control system for the process of extruding the polymer coating of pipes

    This work is devoted to the development of a control system for the technological process of extruding a polymer coating of pipes. In the process of work, the existing system for regulating the temperature of the polyethylene extruder zones was analyzed, and the scientific and technical literature was analyzed. The description of the technological process of extruding the outer polymer coating of a steel pipe is given, the selection of automation equipment is carried out. The main difference between a proportional controller over a proportional-integral-derivative controller was described, the optimal tuning coefficients of the PID controller were also determined using experimental methods, graphical transients were given, and the most appropriate method for controlling the temperature of the zones of worm machines was selected, due to which increasing the homogeneity and uniformity of the protective polymer layer.

    Keywords: pipe polymer coating extrusion, PID controller, polyethylene, adhesive

  • Calculation and instrumental method for determining the standards for the accumulation of solid municipal waste at the objects of stationary retail chains

    A methodology has been developed that can be used to develop calculation and instrumental methods for determining the standards for the accumulation of solid municipal waste for retail chains under common management, having a single trade and technological process, a similar range of goods for sale and carrying out separate accumulation of secondary material resources.

    Keywords: accumulation of waste, municipal solid waste, generation standard, object of a stationary trading network, cluster analysis

  • Application of Agile methodology when working together on UI/UX projects in a specialized layout editor

    For prototyping virtual resources, there are modern UI/UX development applications that have the means to build highly productive interaction algorithms, for example, Figma or its promising new competitor Pixso. These programs support the joint redating of projects, and also allow planning and discussion of ideas and stages of work here, in the environment. The correctly chosen method of interaction leads to a multiple increase in productivity. One of the recognized approaches to project planning and management is the Agile design methodology.

    Keywords: team, layout, prototype, website, methodology, formal language, brainstorming, frame, project, interface, plugin, editor

  • Decision support for choosing a strategy in the digital technology market

    The work is devoted to the problems of strategic planning in the digital technology market. The aim of the work is to build a decision support procedure for choosing a strategy, based on internal (related to the characteristics of the firm choosing the strategy) and external (conditioned by the state of the market) factors. It is assumed that the elementary strategy is described by the type, direction and applied area of activity. In this case, the possibility of combining several elementary strategies is considered. The main result of the work is a procedure for choosing a combined strategy based on the application of a genetic algorithm. The use of the methodological apparatus of evolutionary calculations is due to the large number of possible options for combined strategies and the complexity of their evaluation, which makes a complete enumeration of options impractical. The final choice is made by the decision maker based on their own preferences.

    Keywords: IT market, decision support, genetic algorithm