Results of researches on joint influence of specific pressure of pressing and firing temperature on physico-mechanical properties of laboratory samples on the basis of atyukhtinsky clay raw materials is shown. For the purpose of increase of frost resistance of the burned samples into structure of masses entered a carbonat containing modifying additive in an amount of 5%. For a quantitative assessment of influence of the specified factors on the main indicators of the burned samples researches with application of mathematical planning of experiment and computer processing of results were conducted. Specific pressure of pressing varied within 20±5 MPa, firing temperature – 1000±50 0C. By results of experiment the regression equations are received. It is defined that at increase of value of both varied factors, frost resistance and durability of samples increase, and water absorption – decreases. It is shown that, operating even with two technology factors – the specific pressure of pressing and firing temperature – it is possible to change significantly properties of finished products, and, using the received equations, it is possible to predict future properties of products at a stage of their production.

Keywords: frost resistance, burned sample, modifying additive, specific pressing pressure, firing temperature, mathematical experiment planning

he paper deals with public utilities and their specificity. Address the issue of affordability of housing and communal services. Sformulrovano one of the areas of economic transformation utilities in Russia. The main forms of contracts of public-private partnership in the sphere of housing and communal services are: a service contract, management contract, lease, concession agreements. To implement solutions and socially important tasks of the federal target program "Complex program of modernization and reform of housing and communal services for 2010-2020 public-private partnership should be a well-oiled mechanism of long-term sotrudnichestiva government and business on mutually beneficial terms.

Keywords: housing and communal services, the availability of housing and communal services, public-private partnership.

In the article the types of the tubes, used for transportation of hydrocarbon resources on oil and gas fields of West Siberia are considered. the analysis of the statistical data and materials on the corrosion protection in the West-Siberian region is also provided in the article. moreover, the most optimal and effective ways of corrosion protection using the tubes of high corrosion resistance are introduced in the article.

Keywords: hostile environment, incident, corrosion, alloy steel, reliability, refusal, pipeline

Modern trends in the transformation of business structures and forms of inter-firm cooperation have led to the emergence of new organizational and structural solutions allowing businesses to successfully compete in the market, respond quickly to changes in the external environment and internal changes, contributing to the development potential of the business. So in the Russian economic practice, along with established corporate organizational structures and network business structures brand new specific structural forms are gaining popularity, being diversified entrepreneurial business systems, combining features of corporate and network structures, but also having specific characteristics that allow them to be identified as an independent type of structures. This paper discusses the most important parameters influencing the development of a diversified network of entrepreneurial business systems and analyses key characteristics of the data structures to identify their place in the chain of organizational structures evolution  

Keywords: organizational evolution, corporate structure, network structure, diversified entrepreneurial structure, business system

"This review covers various methods of synthesis LaMnO3 ferroics. The general analysis of the solid-phase synthesis reactions methods and wet methods (sol-gel, sorption, co-precipitation) are carred out. The original results of LaMnO3 syntheses from various precursors by means of the in situ method are showned. The advantages and disadvantages of different methods of synthesis are determined. The analysis of synthesis LaMnO3 ferroics published data is shown:
- the structure formation of LaMnO3 in perovskite-type phases occurs at different temperatures, depending on precursors states;
- LaMnO3 perovskite phases differ in symmetry and unit cells parameters at room temperature, depending on the preparation conditions;
- the highest synthesis temperature of LaMnO3 are typical for solid phase reactions method (950-1050 ° C), the lowest - for wet synthesis methods (500-700 ° C);
 - the synthesis conditions effect the stoichiometry of LaMnO3 for oxygen content.
Our studies of structure formation processes of LaMnO3 by in situ method are allowed to define the role of precursors states at synthesis of solid phase reactions methods, adsorption, co-precipitation and sol-gel mixtures.
It is determined that in samples prepared by wet chemical methods, the formation processes of  LaMnO3 perovskite phases occur at lower temperatures than by solid phase reaction (sol-gel precursor - 500 <T <600 ° C; precursors obtained by coprecipitation and sorption methods - at 600 <T <700 ° C and 700 <T <800 ° C, respectively).  

Keywords: ferroics, LaMnO3, X-ray diffraction, solid-phase synthesis, sol-gel synthesis, sorption, co-precipitation

We solved the problem of optimization of thick-walled prestressed concrete cylinder loaded by internal pressure. Preliminary stresses in such a cylinder are created by wounding with tension cables on the outer surface. The idea of the method is to find the law of variation of modulus of elasticity , in which the state of stress is given . The analytical dependence of modulus of elasticity of the radius at which the tensile stress in the entire thickness of the shell does not occure was found. By creation of indirect heterogeneity we reduced the consumption of rebar by 10%.  The direct problem - determining the stress- strain state of a cylinder with a constant modulus of elasticity was also resolved.

Keywords: thick-walled prestressed concrete cylinder, optimization, inverse problem, theory of elasticity, heterogeneity

An approach to the calculation of the optimal values ​​of the protective layer of longitudinally reinforced concrete columns, operating at a central compression. Modeling performed using FEM - Ansys package for the design and implementation of spatial models of flat section of the column.

Keywords: reinforced concrete column, longitudinal reinforcement, a protective layer of concrete, finite element method, critical load

The role of technical inspection as source of definition of an actual state of protecting designs is considered. Not destroying methods of definition of durability and thermal properties of materials of external walls are resulted. The thermographic method of not destroying control is considered, the list of thermal characteristics which can be defined with its use is presented. Modern requirements to thermal characteristics of external walls are presented and the materials most often meeting in protecting designs are considered. It is considered as a possible variant of increase of thermal properties of protecting designs - the device of hinged ventilated facades. The scheme of carrying out of a damage control, a substantiation of economic efficiency of the device of hinged ventilated facades and other technical advantages concerning other ways of warming of facades is presented.

Keywords: Technical inspection, thermographic quality monitoring, thermal characteristics of protecting designs, hinged ventilated facade

On the basis of experimental data on the resistance of reinforced concrete columns eccentric compression was obtained analytical dependence of the limiting compressibility of concrete from the varied factors: the relative eccentricity of the external force eo / h and the reinforcement ratio μ.

Keywords: reinforced concrete column, longitudinal reinforcement, a protective layer of concrete, finite element method, critical load

The existing methods of calculation of the annual change in soil temperature. Identified areas of their application and the possible deviations from reality. The requirements to the boundary conditions of the calculation. Defines the principles of the choice of initial conditions. The preconditions for the development of a universal method of calculation.

Keywords: heat pump, renewable energy, solar radiation, transient mode, soil

The paper examines the main approaches to the modeling of scientific and technical progress. Details the conditions and change the model postulates technological structure , its main provisions . Put tasks that are of great interest for scientists involved in the modeling of scientific and technological progress , and for economists who are interested in the practical application of these results . Values ​​of other well-known models of STP . The variants of modernization and the possible synthesis of these approaches to modeling change tehnologichekogo order.

Keywords: scientific and technological progress, advanced technology, changing technological way of practical experience, the elasticity of factor capital

The analysis of a current status of region transport system was carried out. Main problems of public transport system were revealed and the directions of their decision were determined. Author suggest to use the concept of a sustainable development for the purpose of creation of sustainable transport and logistic system (STLS). The main components were considered, the basic principles of creation of STLS were systematized. Result of research is the complex of managerial measures and strategy of STLS directed on forming.

Keywords: public transport, transport and logistic system, sustainable development, complex

The analysis of the main approaches to the classification of waste. Revealed their shortcomings. A new approach to the classification of the position to consider the consumption of solid waste as a dispersed system. The main parameters that characterize the processes and phenomena observed in the waste.

Keywords: Solid waste consumption, classification attributes, parameters properties of the waste

Is considered the main content of the possibilities for extending the services of the lifting cranes, on the basis of the definition of a residual resource of the machine. The algorithm is sampled( measurements) of the metal structures of cranes. A variant of transition from the hardness of steel to its  strength.

Keywords: chapel strength, chapel, endurance, a residual resource, providing design, resource rationing, hardness

The paper discusses the features of the development of the information economy in Russia. The analysis of the current stage of development. Structure disclosed information market: actors and segments. Reflects the dynamics of the development of the information market and the integration of the domestic information market. Software market in 2011 grew by 23.8% and amounted to $ 162 million major share of the Russian market controlled by big international suppliers .
The main share of the Russian market of equipment controlled by big international suppliers , whereby these segments are also characterized by a low level of competition: the company's market share is 16 % AcerInc sales , SamsungElectronicsRus -14% of the market. Growth of the Russian market of equipment for IT- communications mainly determined by the development segment tablets and laptops .

Keywords: information market segments of the information market, cloud computing market, problems, especially