Two-stage modeling of a parametric architecture object of a complex parametric architecture are considered in the article. At the first stage it was analyzed the evolution of the formation of an analytical surface obtained by rotating the Lame curve in a plane perpendicular to the axis of rotation. During the investigation were considered changes in the intensity of rounding of the corners of the shape in the horizontal plane. Study of screw parametric surfaces was carried out at the second stage. New forms of a superellipse were developed to solve the problem of determining the surface of an object of parametric architecture that is resistant to aerodynamic impact. Numerical experiment with use of the finite element method in the ANSYS PC allowed to construct a new analytical surface with a different angle of twisting of floor slabs along the height of a unique building. The proposed method of research and application of the possibilities of the evolution of shaping allows to proceed to the modernization of BIM technologies in the design of unique buildings and structures.

Keywords: parametric architecture, evolution of shaping, aerodynamics, finite element method, analytical surfaces

This article discusses a proportional-integral-derivative controller circuit for an unstable system with a delay in a parallel control structure. The parallel control structure has two separate controllers for tracking tasks and suppressing load disturbances. The considered controller is developed on the basis of a direct synthesis approach by choosing a separate reference model with feedback. The proposed design method is applicable to both the lower and the high-level unstable process without model reduction in the higher order process. The effectiveness of the proposed method is demonstrated through example modeling and comparison with methods published in the literature.

Keywords: proportional-integral-derivative regulator circuit, direct synthesis, reference model, design method

The article presents the results of research of dryung asbestos ores in a suspended layer. Equations are obtained that reflect the effect of the initial moisture content of the ore on the Nusselt criterion. The obtained dependencies can be used for calculating tube-dryers for asbestos ores in a suspended layer.

Keywords: drying, tube-dryer, asbestos ore, suspended layer, moisture content, speed of the material, mass transfer coefficient, Reynolds criterion, Nusselt criterion, criterion equations

Traditional analytical methods for determining critical forces lead to difficult solutions of transcendental equations, therefore they are not universal and are ineffective for rods with complex design schemes. The proposed numerical-graphical method for determining critical forces, can be easily adapted to complex non-classical problems.

Keywords: Euler problem, rod, critical force, stability, differential equations, boundary conditions, finite difference method, eigenvalues

This article proposes the development of a method for fixing changes in the galvanic skin response and human pulse, depending on the viewing of a video fragment, which presumably causes a certain emotional reaction of a person. The creation of a prototype device on the Arduino Leonardo platform and compatible with this platform sensors for fixing galvanic skin response and a human pulse sensor is described, with the help of which data is collected for further use in determining the emotional state of a person.

Keywords: galvanic skin reaction, pulse, emotional state, arduino, emotion

An assessment of the innovation infrastructure of the regions of the North Caucasus Federal District was carried out, which showed that their organizational structure does not create conditions for the effective functioning of innovative processes, which is expressed in weak innovation activity, a small number of innovative firms, a low degree of commercialization of scientific developments and their implementation efficiency, in the absence of effective market mechanisms. financing science and innovation.

Keywords: innovation infrastructure, innovation activity, regional economy, institutional environment

Crushed stone-mastic asphalt concrete is a more durable material compared to traditional asphalt concrete. But for its exploitation, high-quality mineral powders and bituminous carriers are needed to prevent bitumen from flowing out of the composition. Today, the carbonate rock powders and bituminous carriers from natural cellulosic fibers are widely used. However, many Russian Federation regions, including the Krasnoyarsk Territory, are not provided with these materials, and they are also really expensive. The purpose of our work was to reduce the cost and improve the properties of crushed stone-mastic asphalt concrete. The task of the research was to develop gravel-mastic asphalt concrete compositions using the industrial waste from the Krasnoyarsk Territory. Nepheline sludge was tested which is the waste of the alumina plant in Achinsk and rubber crumb with inclusions of cord fiber of Chernogorsk in Krasnoyarsk Territory. The chemical composition and physical and mechanical properties of these wastes were studied. Gravel-mastic asphalt concrete compositions were made by using these wastes. The tests showed that the received compositions met regulatory requirements. The developed compositions were introduced by “Krasnoyarskavtodorom” on the Krasnoyarsk Territory roads. The economic effect of the waste usage is achieved through the exploitation of the local raw materials, which leads to a reduction of the transportation and energy costs.

Keywords: the crushed stone-mastic asphalt concrete, industrial waste, nepheline sludge, mineral powder, bituminant, rubber waste with corded fiber inclusions, crushed stone, sand Crushed stone-mastic asphalt concrete, industrial waste, nepheline sludge

The article describes the problems of modern industrial architecture of small and medium-sized enterprises. The conflict between the established design practice based on the methodology of the 70s-80s of the XX century is revealed. A method of solving the problem based on the planning rethinking of the principle of "flexible" layouts is proposed and the introduction of a new element into the structure of the enterprise – the development zone.

Keywords: industrial architecture, problems of modern architecture, flexible planning solutions, functional mobility, blocking of premises, small-scale functional zoning, industrial enterprise development zone

Blasting operations are often the only way to prepare the material for the recess for laying roads and railways in the rocks. Explosive loosening is also used to extract stone as a building material. Field testing is costly and often dangerous. Therefore, it is necessary to first conduct a series of experiments on the model and find out the conditions for ensuring good quality loosening of rocks. In order for the results of model tests to be transferred to nature, a similarity between model and specimen is required. The approximate similarity is achieved by the equality of the similarity criteria for the model and specimen. The characteristic similarity criteria are obtained by analyzing the physical quantities inherent in a mechanical system using the theory of dimension and similarity. The received criteria are presented in the classical form. These are the criteria of Strouhal, Froude, Cauchy and Newton.

Keywords: explosive loosening, rock material, deceleration interval, similarity criterion, modeling, rock density, model, specimen, expansion height, dimensionality, physical quantity

This article proposes a hybrid algorithm for assessing the quality of regulatory legal acts (RLA). This algorithm uses the methods of fuzzy mathematics, processes with their help the results of the questionnaire survey of the expert group. The result of the algorithm is the quality characteristic of the NLA in the form of a fuzzy term of a linguistic variable. As an option for automating this algorithm, a specialized automated system is proposed.

Keywords: regulatory legal acts, quality assessment, fuzzy algorithms, automated systems, linguistic variables

The article considers a generalized algorithm for assessing the quality of socially significant activities (hereinafter referred to as CPAs), which provides for expert assessment and subsequent data analysis using one of the assessment scales (linguistic, point and interval). Methods are proposed that are advisable to apply at various stages of the generalized algorithm. The groups of criteria for assessing the quality of CPAs are determined: deterministic and partially deterministic. It is proposed to calculate the quality assessment of CPAs by summing the values of the calculated deterministic and partially deterministic criteria, adjusted for their weight determined by an expert. When implementing the proposed algorithms, the mathematical apparatus of fuzzy logic was used, which allows us to carry out calculations with fuzzy given input information characteristic of social objects. It is convenient to automate and apply such algorithms when the data is presented in a qualitative interpretation.

Keywords: socially significant activity, quality assessment, quality assessment algorithm, optimization, expert assessment, automation, fuzzy set, entropy approach, system analysis

In contrast to the classical transport problem, according to the minimum total time criterion, it is assumed that resources are processed both at the source points and at the destination points, the duration of which depends linearly on the volume of the processed batch. This takes into account both the availability of the vehicles involved and their characteristics, such as load capacity. The use of the Hungarian method is justified for the distribution of resources along the available routes. To solve the problem of distribution of available vehicles by starting points, taking into account the load capacity of vehicles, it is proposed to use the method of dynamic programming. An illustrative example and distribution of delivery means using the "Search for a solution" command in MS Excel are considered.

Keywords: transport task, minimum time criterion, processing costs, load capacity

A model that implements a method for assessing the security of a special purpose automated information system is considered in the article. The model takes into account both the intensity of the load on the system and the number of channels as a means of protecting information from DDoS attacks based on the combination of theoretical and empirical approaches to assessing security of special purpose automated information system. The transition from a theoretical model using empirical states and continuous time to a discrete time model is applied to build a new model. The purpose of the work is to develop a model that implements a method for assessing the security of a special purpose automated information system against DDoS attacks based on a theoretical-empirical approach to modeling information protection means against DDoS attacks.The following tasks are solved in the article: analysis of known models that implement the method for assessing the security of special purpose automated information system from DDoS attacks; the model which implements a method for assessing the security of special purpose automated information system based on a theoretical-empirical approach to modeling information protection against DDoS attacks is being developed. The use of the new model makes it possible to apply both empirical values obtained as a result of measurements or modeling, and a theoretical basis for modeling information protection means under the influence of DDoS attacks, taking into account their characteristics, which will be reflected by the income function and the choice of the optimal mode of functioning of the special purpose automated information system in discrete moments in time. When synthesizing the models presented in the article, the lack of the static nature of the assessment of the security of the special purpose automated information system was eliminated, the intensity of computer attacks such as DDoS, which dynamically changes both the parameters evaluating the means of protection and the probability of the system being in critical states, was taken into account.

Keywords: automated system, modeling, security assessment, queuing system, probabilistic assessment, DDoS attack

The article is devoted to the importance and relevance of the development of underground space, today in large cities there is an acute shortage of areas free from development, as well as the high traffic congestion with personal cars, these and many other problems can be solved through the integrated development of underground space. The classification of underground structures is given. The organizational and technical problems of construction below the zero cycle are indicated. Examples of competent use of underground space in the world are considered. Benefits of construction below zero cycle are also noted. The objects, the construction of which is promising underground, are described. Attention is drawn to the climatic and anthropogenic factors taken into account during construction. In conclusion, the measures that need to be taken for the development of the underground space of our cities are considered.

Keywords: development of underground space urban studies, organization of construction of underground structures, urban space, cramped urban development, organizational and technical problems

The article is devoted about the importance and urgency of the problem of reconstruction of healthcare facilities, since hospitals, like other forms of ownership, accumulate moral and physical deterioration and need periodic repairs or full-scale reconstruction. In our country, it is not uncommon for a hospital to be a dilapidated building whose service life is coming to an end. That is why in our days the issue of full-scale reconstruction of healthcare facilities is so acute. The Ministry of Health of the Russian Federation has developed a number of measures, thanks to which, according to Rosstat, more than 10 thousand hospitals will be repaired by 2024. The authors of the article make a comprehensive assessment of maternity hospitals in Rostov-on-Don, show their layout and fertility chart. The following is an example of the reconstruction of the observational building of the MBUZ. In the conclusion, the results are summed up and the measures that need to be taken for the comfortable stay of people in the hospitals of our country are determined.

Keywords: reconstruction, healthcare, operation, buildings of medical institutions