Presented and theoretically justified ways of improving the technology of centrifugation, to increase the uniformity of the concrete structure in the cross section, for example, by way of separate introduction of the components of concrete, the essence of which in the manufacture of spun goods consists in the introduction into the molding unit prior to the stage of compaction of coarse aggregate. The results of physical and mechanical tests of centrifuged concrete, showing that the layer-by-layer introduction of the concrete mixture components by the first method leads to an increase in the compressive strength in all layers of centrifuged concrete

Keywords: concrete, centrifugation, uniformity of structure, layer-by-layer introduction of components, compaction, water absorption at capillary suction, strength

The problem of recognition of defects in the surface layer of polished raceways of bearing rings according to the fractal dimension of the signals of the eddy current sensor is considered

Keywords: fractal dimension, defect recognition, recognition algorithm

The work is devoted to the review of application of wireless technologies for measurement of parameters of technological processes. Two types of wireless network architectures are considered: "star" and "cellular". It is proposed to take as a basis the topology "cellular scheme". Three wireless standards are given: ZigBee, Wi-Fi and Bluetooth. The advantage of ZigBee technology is shown. RFID technology is considered as the basis of the wireless sensor. Features of construction of system with its application are considered. The block diagram of the control system is given. Classification of RFID-tags is given. Examples of such sensors are given.

Keywords: wireless technologies, cellular circuit, RFID tags, wireless sensors, automation of technological processes

Three batches of Co-MxOy / SiO2 catalysts were prepared with different methods of introducing an oxide additive. Physicochemical studies of catalysts by elemental analysis and Brunauer-Emmett-Taylor (BET) methods have been carried out. The effect of additives of oxide promoters and the method of their introduction on the specific surface, volume and pore sizes for Fischer-Tropsch synthesis catalysts were studied.

Keywords: Fischer-Tropsch synthesis, carbon-containing resources, catalyst, active component, silicate carrier, Al2O3 and ZrO2 promoters, elemental analysis, BET method, surface area, volume and pore size

Using the methods of thermo-programmed reduction (TPV) and thermo-programmed hydrogen desorption (TPD H2), physico-chemical studies of Co-MxOy / SiO2 catalysts obtained by various methods of introducing a promoter additive were carried out. The effect of the introduction method and the nature of the promoting oxide additive on the properties of the active component of the Fischer-Tropsch synthesis catalysts was studied.

Keywords: Fischer-Tropsch synthesis, catalyst, active component, silicate carrier, Al2O3 and ZrO2 promoters, TPV and TPD H2 methods, crystallite size, degree of reduction, dispersity

The article reviews considers the current state of automated process control systems. The main disadvantages of these systems are identified: the lack of full integration of process control systems into a single enterprise system, the lack of a single system of monitoring and diagnostics of equipment, local data storage. The principles of development of automation of the chemical industry in the conditions of digital production, such as end-to-end modeling, implementation of a unified data collection system based on the technology of industrial Internet of things, the introduction of cloud technologies to store the accumulated database and knowledge. This strategy of automation development allows to increase the competitiveness of the chemical industry.

Keywords: production automation, digital production, end-to-end modeling, industrial Internet of things, production management integration.

The article deals with the process of spraying immiscible liquid media with a disk spray. A mathematical model for determining the dispersion characteristics of spraying is proposed.

Keywords: liquid, atomization, flow, speed, dosing

This article discusses the basic principles of the use of structural membranes in the reconstruction of buildings and structures. Three principles of intervention in the existing architecture are described in detail. The first is to preserve the historical appearance and character of the building. The second is the scale of the new and old parts of the building. The third is the difference and the possibility of reorganizing new designs. The characteristics of the goals, the achievement of which each of these principles is directed, are given. Using the example of several buildings, we analyzed the use of textile membranes to achieve the main goals of reconstruction, described the positive and negative aspects of restoration using textile membranes. These buildings include: a church on a hill in Corbera d'Ebr, Spain (roof restoration), the central courtyard of the Palacio de Mineria, Mexico (creating coverage over a yard area), Salzburg residence, Austria (sliding roof). In conclusion, conclusions were made about the advantages of using membranes for the preservation of historical heritage and possible prospects for the development of fields of application of this design.

Keywords: architecture, membranes, reconstruction, restoration, structural structures

In article results of the analysis of method of calculation of flat plates of girderless floors are considered on breakdown according to the Russian and foreign design codes are considered. The analysis of the received results demonstrates that in the considered calculation procedures on breakdown similar settlement models are used and identical power factors are considered. Namely the pressing-through effort and the bending moments operating in two planes. Taking note of the moments in various techniques is carried out in two ways. The first way – tangent tension is entered into settlement model. And each technique offers the form of an epyura of tangent tension. The second way – introduction to a condition of durability of the empirical coefficient considering influence of the bending moments. Approach to purpose of geometrical parameters of a settlement (critical) contour is not identical. Contours of different techniques differ in a form and the sizes. And the difference of the sizes is very considerable. It is established that work of knot of interface of girderless flag with a column is studied yet not fully and additional researches on generalization of calculation procedures are required.

Keywords: reinforced concrete, girderless floor, breakdown, working height of section, transversal armature, pyramid of breakdown

The main disadvantages of the methods of diagnosing the cylinder-piston group used at present are indicated in the article. Mathematical dependencies and the technique of technical diagnosing of a cylinder-piston group of diesel engines with a cold starting cranking of a cranked shaft developed on their basis are offered.

Keywords: engine, cylinder-piston group, compression,diagnosis, cold idle cranking of the crankshaft

The article is devoted to the study of the thyristor regulator of the booster voltage harmonic composition in the mode of longitudinal-transverse regulation. The results of the harmonic analysis of thyristor regulator output voltage , obtained using simulation in the Simulink package, are presented.

Keywords: longitudinal-transverse regulation, thyristor regulator, regulating characteristics, modeling, harmonic analysis, Matlab Simulink

The application of the parameters of the modes of signal allocated using the extremal filtering algorithm is considered. The use and disadvantages of amplitude detectors are described. Use of attenuation are described and shows how to reduce the effect of ""overshoots"". It is proposed to use a combined sign for a more contrast extracting of detection areas. A method for reducing the labor intensity is presented, which consists in applying filtering directly to a number of extrema, without calculating the smoothed components.A method was chosen that allows the signal analysis algorithm to be adapted to work in real time.

Keywords: Security system, diagnostic signs, extreme filtering, mods, real time

The article discusses the process of sulfuric acid alkylation used to produce high-octane gasoline, as well as the design of jet reactors, their advantages and disadvantages. Based on the existing drawbacks of jet reactors, the development of a new high-efficiency jet reactor design has been proposed.

Keywords: reactor, sulfuric acid alkylation, isosurface, isocontours, gasoline, fractions, jet type, industry, oil refining

The possibility of creating centrifuged products of an annular cross section with a variotropic structure due to the introduction of a porous aggregate is considered. Various methods of introducing coarse aggregate have been studied in order to increase the uniformity of the physicomechanical properties of centrifuged products. The study examines the effect of various types of fiber fibers on the physicomechanical properties of centrifuged concrete. The results of physical and mechanical tests of fiber-reinforced concrete showed that the greatest effect on compressive strength is achieved with the introduction of a metal fiber into the composition. At the same time, shrinkage deformations are lower by 20% in the composition with basalt fiber as compared with the control fiber. Studied recipe-technological techniques have proven their effectiveness and can be successfully applied in construction practice.

Keywords: centrifuged concrete, fiber, fiber concrete, coarse aggregate, porous aggregate, variotropic structure

The article presents and studies the theoretical foundations of vibration and centrifugal compaction of heavy concrete in the production technology of building products and structures. Attention is paid to such a technique as vibropressing. The physical entity is described, the phenomena of the processes occurring during the molding of such products and structures are disclosed. The influence of dispersed reinforcement of vibrated and centrifuged concretes by various types of fiber fibers on their coefficient of structural quality is considered and evaluated.

Keywords: vibrated concrete, centrifuged concrete, dispersed reinforcement, coefficient of structural quality, vibropressing