×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • The problem for static conical indentation into the surface hardened area

    The paper considers the actual problem of an assessment of mechanical characteristics of two-layer materials by nondestructive methods (a method of conical indentation). The calculation of the process of indentation into two-layer medium by the finite element method with ANSYS program. The influence of layer thickness on the parameters of the indentation is considered.

    Keywords: conical indenter, nondestructive testing, mechanical properties, strength tests of metal, finite element method, hardness, surface hardening

  • On some characteristics of the development suhodolnyh quarries of sand in the permafrost zone for oilfield

    АнглийскийПеревести вGoogleBingThis article is devoted to the development of suhodolnyh pits in the permafrost zone. For the development of fields in the Arctic requires a large amount of sand for engineering training close to roads, well pads, sites for the installation of complex gas treatment, high pressure pump stations, the Central points of separation and other site projects. Development suhodolnyh quarries of sand in the Arctic requires further activities for the preparation of the sand to a condition suitable for construction. Range transport of sand from the quarry to the designed object will be considered acceptable when the object is within 20 km of the planned quarry, the transportation distance is more than 20 km puts an end to the possibility of further implementation of the project and directly affects the net present value of the project. Improvement of technology of development of dry sand in quarries can positively influence the Economics of the projectThis article is devoted to the development of suhodolnyh pits in the permafrost zone. For the development of fields in the Arctic requires a large amount of sand for engineering training close to roads, well pads, sites for the installation of complex gas treatment, high pressure pump stations, the Central points of separation and other site projects. Development suhodolnyh quarries of sand in the Arctic requires further activities for the preparation of the sand to a condition suitable for construction. Range transport of sand from the quarry to the designed object will be considered acceptable when the object is within 20 km of the planned quarry, the transportation distance is more than 20 km puts an end to the possibility of further implementation of the project and directly affects the net present value of the project. Improvement of technology of development of dry sand in quarries can positively influence the Economics of the project

    Keywords: permafrost, perennial cryolithozone, quarries, sand, sand, career preparation to sand mining, development of oil and gas fields.production

  • Mathematical methods for bearings of unmanned aerial vehicles identification in a group

    The questions of mathematical interpretation of results of trajectory measurements are discussed in terms of increasing the accuracy of identification of bearings of unmanned aerial vehicles during their movement in a "swarm" - a group. Variants of identification of horizontal and spatial bearings are offered. For each of the variants, criteria are proposed for identifying the belonging of the measured values ​​to the same object in the group and the conditions for achieving them. The situation of false positives is shown. It is determined that additional identification measures are needed to eliminate false bearing triads and uncovered ambiguities, including the use of combinatorial exhaustive search algorithms. For their study, it is necessary to develop an experimental statistical model with an algorithmic description of cause-effect relationships, which is a further development of this work.

    Keywords: " unmanned aerial vehicle, group of objects, bearing identification, horizontal bearing, spatial bearing, identification criteria, false notch"

  • Investigation of mathematical methods for identifying bearings of unmanned aerial vehicles in a group

    The problems of studying the mathematical interpretation of the results of trajectory measurements in terms of increasing the accuracy of identification of bearings of unmanned aerial vehicles during their movement in the group "swarm" and "system" are discussed. The variants of identification of horizontal (IHP) and spatial bearings (PPI) are proposed both separately and in a complementary application. Identification of bearings of similar objects in the swarm type group is expedient to be carried out according to the IGP-IPP algorithm. However, it is only partly operational at distances of 3 km or more. As the main algorithm for identifying bearings of similar objects in the "Story" group, it is advisable to use IPP. Although these algorithms achieve high identification efficiency under favorable conditions, with tougher conditions, they drop rather sharply. Therefore, to maintain a high level of probability of "pure" identification, it is advisable to use additional measures to combat false triads. For the removal of problems, it is necessary to develop and apply combinatorial algorithms for exhaustive search, which is the direction for the development of further research.

    Keywords: unmanned aerial vehicle, group of objects, bearing identification, horizontal bearing, spatial bearing, identification criteria, false notch

  • Resources hydrothermal waters of the North-Western part of the Azov-Kuban artesian basin and prospects for their use in the economy of the Rostov region

    The article contains material reflecting the prospects of development of hydrothermal resources formation waters of the Azov-Kuban artesian basin.

    Keywords: hydrothermal energy, groundwater, methane gas saturation

  • Application of a new scientific approach to the assessing of grain dust properties

    The authors propose to choose the system of air purification from grain dust, which has the maximum ecological efficiency and energy efficiency, based on the study of the properties of this pollutant. Investigation of the grain dust parameters of the properties of the dispersed phase and dispersion medium, as well as energy parameters will affect the stability of the aerosol, i.e. its ability to resist external influences. Changing the stability of the grain dust aerosol and, ultimately, its destruction due to the separation of the dispersed phase and the dispersion medium, is the purpose of the development of air purification system.

    Keywords: grain dust, dispersed system, parameters of pollutant properties, energy parameters, stability of the pollutant

  • Full-scale studies of the noise characteristics of the transport stream with a directional microphone

    The constructions of directional microphones of the "linear" type and the test procedure are described. On a controlled lane of the highway, full-scale studies of microphones produced by the authors were carried out. Thus, the relative error in the measurement of microphones No. 1 and 2 was found, which was 12.1 and 13%, respectively. The minimum error is detected with a microphone of the "linear" type No. 1, whose slots are located on the sides on four sides

    Keywords: transport stream, transport noise, passive acoustic detector, directional microphone

  • Organizational culture as a tool for improving staff motivation

    This article analyzes the role of organizational culture as an important tool for increasing staff motivation. There are revealed peculiarities of interaction of enterprise culture and corporate system of motivation and the substantial party culture from a position of strategic resource of the enterprise in the management of the personnel motivation.

    Keywords: organizational culture, motivation, staff, culture, motivation, motivational policy of the enterprise, corporate incentive system

  • Algorithm for matching the array of points and the surface area

    In the article the algorithm of construction of an array of points, put in correspondence to points of a compartment of a surface is resulted. Calculation formulas for the coordinates of points are shown. The possible cases of the location of the corner points of the array are considered. And the conclusion is made that this algorithm will help in modeling acoustic, optical and other processes.

    Keywords: array of points, surface area, algorithm for matching array points, geometric modeling, radix-vector

  • Development of a method of energy saving in industrial enterprises

    Nhe proposed method save energy, including the classification of cars according to the power consumption and algorithm of measures whose implementation at the industrial enterprises will reduce the energy consumption

    Keywords: the method of the power saving algorithm of measures to reduce energy consumption

  • Investigation and optimization of the gas-powder flow within an off-axis nozzle of the laser technological complex

    Gas-powder dynamics within the off-axis nozzle of the Precitec YC52 laser cladding head (Germany) has been studied using the original Tepler shadow setup, the high-speed tracing system and the laser Doppler anemometer. The length of the laminar part of the gas-powder flow has been optimized for variety of the transport and shielding gas flow, as well as the diameter of the orifice of cyclone. Powder jet at the nozzle’s outlet follows the carrier gas flow structure. In case of 4 mm nozzle’s diameter, the powder stream separates into two stable vortex structures near the surface of the substrate, causing significant losses of powder particles (about 2/3 of the total powder mass) within the melting zone, which finally reduces the efficiency of the deposition process and the powder utilization. Practical recommendations on the application of the optical diagnostic to optimize gas-powder jets for laser cladding are provided.

    Keywords: laser powder cladding, shadow method, off-axis nozzle, tracing, laser Doppler anemometry, gas-powder flow optimization

  • Assessment of the quality of work on the construction of the upper layers of the road surface is not a destructive method

    The assessment of the quality of the production of works on the construction of the upper layers of the road cover by the destructive and non-destructive method is considered, both methods are compared by searching for the main advantages and disadvantages. The order and the scheme of the production of each of the estimates are described.

    Keywords: motor roads, quality assessment, road facilities, gamma density meters, electromagnetic (dielectric) densitometers, radioisotope densitometers, densitometer

  • The task of developing a SAT-solver for finding verification sets in software testing

    This work is devoted to the automatic generation of verification sets of test procedures; the proposed and developed algorithm for selecting trial solutions for solving the problems of satisfiability of Boolean formulas.

    Keywords: test sets, automatic generation, solver, Boolean constraints

  • Prospects for the use of the modified foamed perlite to obtain the new composite materials

    The article deals with the characteristics of hydrophobic swollen perlite and methods of its research. The perspective of the use of expanded perlite in various industries is described. Possibilities of application of these materials in practical use are shown.

    Keywords: composite materials, energy saving, modification of perlite, hydrophobic perlite, methods for improving properties

  • Professional risk on the basis of special assessment of working conditions

    The article deals with the estimation of production risk and risk of occupational diseases on the basis of an assessment of the impact on the working factors of the labor process. Analysis of the working conditions according to special evaluation of working conditions. Definition of factors of production environment, harmful to the health of workers and comparative analysis of the working conditions for harmful production factors.

    Keywords: occupational risk, harmful and hazardous production factors, identification, conditions of work