×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • Improvement of water treatment surfactants for water recycling (for example, swimming pools)

    Considered clean water in swimming pools, on nonionic and anionic surfactants with special adsorbents. Water purification pools plavatelnyx unique, first of all, because the water contains various types of pollution, which it is exposed. Most of these contaminants are introduced by the users of the swimming pool and they have to be removed or destroyed (bacteria, viruses, organic, sweat, hair, makeup, etc.). Treatment of swimming pool water is much more complicated because of the need to carry out her many times, than drinking water treatment, which is carried out one-time. Based on these studies, given technological solution to improve the efficiency of purification of circulating water in swimming pools, ensuring high environmental and economic performance of water treatment.

    Keywords: recycling of water, swimming pools, surface-active agents (surfactants), azotoammoniynye organic compounds (AOC), a rapid method of analysis

  • Sorbents for the desalination of saline water from surface sources

    Problems of the treatment of highly mineralized water from surface sources. Today, more than 70% of rivers and lakes has lost its main function as sources of drinking water. An important problem is to find technological solutions that take into account the territorial features and allows you to create reliable purification of saline natural waters with minimal capital and operating costs. In the present paper presents the results of a study of the composition and properties of natural raw chocolate clay Altonaga field, studied its sorption properties.

    Keywords: the quality of water, saline water, surface water sources, the sorbent

  • The possibility of establishing production of bleached chemi-thermomechanical pulp in the Republic of Karelia

    Analysis findings of possibility of establishing production of bleached chemi-thermomechanical pulp in the Republic of Karelia can be found in the article. The advantages of production of bleached chemi-thermomechanical pulp in comparison with paper pulp production are developed in the article. A brief analysis of Russian market of bleached chemi-thermomechanical pulp can be found in the article. Statement of reasons of establishing production of bleached chemi-thermomechanical pulp in the Republic of Karelia can be found in the article too. The establishing production of bleached chemi-thermomechanical pulp could help to solve a problem of deciduous trees processing which is in Republic of Karelia.

    Keywords: Bleached chemi-thermomechanical pulp, paper pulp, cardboard, paper, pulp, processing, deciduous trees, quaking asp, birch

  • Elastic boundary value problem in polar coordinate system

    There submitted the specification of deformed solid body boundary value problem in polar coordinate system. The problem is transformed to the special integral equation while the solution of this problem permits to define local stresses on the conjugation line nearby its concentration.

    Keywords: stress concentrator, elastic body, local stress, boundary value problem, integral equation

  • Determining the relative velocity of the particles of the layer of bulk material inside the cylinder in the elastic separator

    Efficient operation of separators bulk materials is possible when the relative velocity layer on the separating surface which knowledge is necessary to determine the optimal parameters and operating modes. Developed methods of measuring and determining the relative speed of the layer of granular material driving inside the rotating cylinder using a tachometer TCh-10P, which increased the size of the tip (roller), diameter with 31.4 mm to 62.8 mm, width 4 mm to 30 mm, and changed the material of the cushion rubber foam. This allowed tachometer TCh-10P to measure the speed of the layer, and to improve the measurement accuracy by reducing the moment of rolling friction and sliding the cushion layer. The relative error of the measurements during the experiments did not exceed 5% and is confirmed by the results of experimental studies of elastic separator. The technique may also find application in the determination of the velocities of the layer in inclined conveyors.

    Keywords: separation, the separating surface, measure the kinematic regime, the elastic cylindrical separator, tachometer, speed of the measuring roller, separator, reverse curvature, extension rod

  • Wear resistance of the carbon electrical material by modifying novolac binder

    Prospects for manufacturing electrical investigated products based on modified copper oxide (I) a novolac resin. It is shown that copper oxide modification improves the physico-mechanical, tribological, electrical properties, resistance to mechanical wear and oxidation products of the materials. Introduction of coke in the material increases its durability when operating on the worn contact network. Trial runs have shown a trolley parks that the contact insertion trolley manufactured using a modified copper oxide (I) novolak binder in performance on average 2-4 times higher than the commercial materials of different manufacturers

    Keywords: trolley collector insert, carbon and graphite material, modification of the novolak binder, copper oxide (I), sea trials

  • Resource conservation with snow removal in urban environments

    An analysis of snowplows in urban environments. Determined that the efficiency of snow removal from roads, sidewalks areas affected humps (bumps), borders, etc. In line with this analysis of structures working bodies (dumps), used in Russia and abroad, as well as analysis of patents. In accordance with the foregoing, all decisions on the management of blade can be divided: extra lever systems; modernization of hydraulic drive; use microprocessors; the combination of these approaches. Obviously, the use of processor technology is justified for high-tech machines, as a consequence has disadvantages in price, qualification of operators and maintenance personnel. For the modernization of existing equipment, at the moment, it is advisable to use the combined system using the lever and hydraulic drive systems. It is necessary to take into account the energy-saving technologies.

    Keywords: snow machines, blade, blade control automation, snow removal from roads, blade control, energy conservation, resource conservation

  • Modeling of heat recovery system of internal combustion engine and special motor vehicles

    A significant number of units and special motor vehicles operated in a low freezing temperatures of the Far North and the Arctic. Preserving the art in these conditions depends primarily on the reliability of the internal combustion engine startup. For this purpose, a means of preparation of heat from external heat sources. In the context of the autonomous functioning of the machine it is necessary to use its internal sources. This can be accomplished using a heat recovery system of the internal combustion engine. To do this, include thermal batteries. In order to increase their efficiency (increasing the thermal capacity, reduce the size) Three constructions of the dual-chamber heat accumulator. To describe the heat transfer of the heat accumulator defines the conditions of uniqueness, according to which a simulation of thermal processes heat storage

    Keywords: operation, heat storage, heat engine preparation, heat transfer, heat recovery system, low negative temperature

  • Analysis of students' attitudes RSSU to political life in mid-2014

    The results of the pilot survey among students of 1 – 2 courses RSSU are given. Presents the distribution function of a indicator set, such as a deprivation, involvement in political processes, relation to power structures, the assessment of the political situation, the level of protest. It revealed a low level of participation in the political process, and the average level of emotional involvement. And as a result are weak electoral and social activities. Assessment of the political situation is neutral, both in the region and in Russia as a whole. The level of latent protest generally low, but 19% of the respondents belong to the mass positive (11% very positive).

    Keywords: a political tension, deprivation, group attitudes, cognitive component, behavioral component, questionnaire, the descriptive statistics

  • Corrosion stability of alkaline tungsten molybdenum oxide bronzes in strong electrolyte solutions

    Corrosion stability for 25 samples of mono- and bealkaline tungsten, molybdenum bronzes in solutions of acids HCl (20-26%), H2SO4 (21-60%), HNO3 (60%) and NaOH (20%), KOH (50%) alkalis at 293-358K and 1-15 month was studied. The samples of polycrystalline bronzes were prepared by electrolysis in melts of Li, Na, K, Rb, Cs of isopolytungstates and molybdates. General formula of bronzes chemical composition is Mx'My'EO3 with M', M'' - alkaline metals, E-W, Mo. High significance of corrosion stability of tungsten bronzes samples in water acids and alkalis was found. For molybdenum bronzes the best results in sulfuric acids and solutions were found. These differences are connected with peculiarity of crystal chemistry and nonstoichiometry of polyalkaline oxide tungsten, molybdenum bronzes.

    Keywords: oxide alkaline bronze of W, Mo, corrosion stability, strong electrolyte, acid, alkali

  • Increase of overall performance of a hydraulic actuator of mobile cars

    In article service conditions of one of the most important systems of mobile cars – a hydraulic actuator, especially under the influence of the negative temperature of air are considered. Ways of prestarting heating and maintenance of temperature of working liquid in use of transport and technological mobile cars are described. The main advantages and the applied systems and devices come to light. The original system of regulation of temperature of working liquid in a hydraulic actuator which will allow to increase efficiency, reliability and accuracy of regulation of temperature is offered.

    Keywords: hydraulic actuator, working capacity, negative temperatures, viscosity, friction, power, torque

  • Influence of high-disperse particles on operational properties of working liquids

    In article the factors influencing effective work the gidrofitsiorovannykh of systems and units of mobile cars, and in particular under the influence of various climatic factors are analyzed. Ways of protection against pollution and maintenance of temperature of working liquid in use of transport and technological mobile cars are described. The essence of the dispergating of working liquids applied to improvement of operational properties of working liquids reveals. The original design of a hydrodynamic dispergator which will allow to increase efficiency of cleaning and maintenance of temperature of working liquid in hydraulic systems of mobile cars is offered

    Keywords: hydraulic actuator, transmission, working capacity, climatic factors, dispergating, pollution, mechanical particles, temperature, working liquid, wear

  • Age-related changes of psychophisiologic drivers characteristics

    The issue of age influence on the change of professionally important psychophisiologic drivers characteristics is considered in this article. The techniguesof evaluation of drivers reaction period and the period of attention distraction, the results of experrimental researches and the analysis are presented in the article.

    Keywords: psychophisiologic characteristics, automobile operation effuciency, driver’s age, reaction, reaction period, attention distraction period, the reaction on the moving object, traffic safety

  • Experimental evaluation of the anisotropy of the stiffness of the front bearing spindle assembly lathe

    Trend of modern development of machine tools lathe group is the use of multiple tool holders, multi-position turrets. This makes it necessary to determine the radial stiffness in the area of treatment in all possible directions of load. In this paper, we propose a method and a method of control stiffness spindles lathes using load device, which allows to determine the static radial stiffness of the spindle assembly when the direction of the vector load. The load device is a cylindrical mandrel with a conical shank. The mandrel is set in a tapered hole of tailstock quill. The angular position of the load lock device corresponds to the direction of the force. The principle of operation of the device is to provide a radial load on the spindle caused by the elastic deformation of the sliding mandrel load device stops the inner conical surface of the spindle. Mandrel previously spanned. This allows to estimate the radial load created by bending mandrel controlled indicator secured thereon. The dimensions of the mandrel are determined finite element modeling depending on the inner cone of the front end of the spindle and the required radial loads. For the experiment was selected eight positions mandrel: the direction of the force was varied by rotating the load device in the bushing at an angle of 45 degrees. According to the results of the experiment was built hodograph elastic displacement of the spindle. Analysis of the results showed that there is a significant change in the stiffness of the spindle bearings depending on the direction of the load, that is experimentally confirmed anisotropy stiffness bearing spindle assembly.

    Keywords: lathe, spindle assembly, rigidity, stiffness anisotropy, load device, finite element method, strain hodograph

  • Basic approaches to modeling processes curing nano-dispersed silicate systems Part II

    In this article we consider the use of quasi-homogeneous approximation to describe the properties of disperse systems. We used a statistical method of polymer based on the consideration of all possible structures averaged macromolecules of the same weight. The equations to assess many additive parameters of macromolecules containing their systems. Statistical polymer method allows modeling branched, cross-linked macromolecules and containing their system in a state of equilibrium or non-equilibrium state. Fractal consideration of random polymer allows you to s imulate different types of random fractals and other objects studied by the methods of fractal theory. A method of statistical polymer is not only applicable to the polymers but also to composites gels associates in other polar liquids and aggregate systems. In this paper we described the state of colloidal solutions of silica from the viewpoint of statistical physics. This approach is based on the idea consists in the fact that a colloidal solution of silicon dioxide - silica sol consists of a very large number of interacting particles in a continuous motion. It is dedicated to the study of an idealized system of colliding, but not interacting particles sol. Analyzed the behavior of silica sol, in terms of Maxwell-Boltzmann distribution was calculated and the mean free path of the colloidal particles. Based on these data, it was calculated the number of particles that can overcome the potential barrier in a collision. For modeling the kinetics of the sol-gel transition, we have discussed various approaches.

    Keywords: quasi-homogeneous approximation, disperse systems, statistical polymer method, the formation of cross-links, fractal method, sol, silica sol, sol-gel transition, the mean free path

  • The dynamics of political attitudes and social tensions among the RGSU's students for the 2013-2014

    This scientific research presents an analysis of the dynamics social tensions and political attitudes among students of 1 - 2 courses for the period 2013-2014 RSSU. Presents the distribution function of a indicator set, such as a deprivation, involvement in political processes, relation to power structures, the assessment of the political situation, the level of protest. of protest. It revealed a decrease levels of participation in the political process and emotional involvement by 2014. The relation of students to government structures improved slightly, there was a shift from low to average sustainable level. Thus lower level of electoral activity of young people to the middle of 2014 is observed. Received higher assessment of the political situation in Russia as a whole by the end of the study period. The level of latent protest generally low, and continues to fall.

    Keywords: a political tension, deprivation, group installation, cognitive component, behavioral component, questionnaire, the descriptive statistics