The use of slag-alkali binders in the technology of drilling piles
Abstract
The use of slag-alkali binders in the technology of drilling piles
Incoming article date: 17.12.2023The article discusses proposals for improving the use of discharge-pulse technology in the construction of boron-injection piles and camouflage widenings of bored piles with diameters of more than 300 mm. The application of voltages on the electrode system of a pulse current generator from 10 to 50 kV and an electric capacity of about 300 UF is considered. It has been found that in the case of using a relatively low voltage on the electrodes and an increase in the electrical capacity of the capacitor bank, the duration of the shock wave pressure on the ground increases several times. This contributes to a more intensive penetration of the liquid hardening material into the intergranular space of the near-well soil massif. It is proposed to use solutions using slag-alkali binders as a hardening material in the formation of boron-injection piles. Such solutions have greater fluidity compared to cement solutions and, when hardened, form a stone with greater strength and density. The article presents data from experimental studies confirming the increased strength (R = 130 MPa) and frost resistance of a solution prepared on slag-alkali binders, as well as data on determining their corrosion resistance to various aggressive media contained in groundwater. The possibility of stable breakdown of the interelectrode gap in aqueous solutions of slag-alkali media of various consistencies has been established, optimal energy parameters of the discharge have been determined for maximum effect of fixing the soils of the foundations.
Keywords: foundations, drilling piles, discharge-pulse technology, slag-alkali binders