×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

Development of an automated system of electric power saving of the Ice Palace using a thermal accumulator.

Abstract

Development of an automated system of electric power saving of the Ice Palace using a thermal accumulator.

Tsarenko A.A., Alyokhin A.G., Polukhin A.N., Guryanov S.A.

Incoming article date: 23.04.2022

With the right approach, the heat generated by chillers in an indoor ice rink can be used to melt ice, a dehydration system, or to heat a concrete pad under a layer of ice. In this way, energy can be saved. For the purpose of accumulation and subsequent distribution of thermal energy in the building, a reservoir that accumulates heat can be used. Heat is removed from the chiller condenser by a water cooling circuit, which is connected to the coil of an indirect heating boiler (heat accumulator). The coil heats the water that circulates in the heating circuit. Since the load on the ice can change during the day, heat extraction will occur in different amounts. For efficient transfer of thermal energy from one heat exchanger to another, it is necessary to control the speed of rotation of the pump impeller so that the controlled function is maximum. If the speed is insufficient, then the heat exchange flow will receive less heat. On the contrary, if the drive drives antifreeze too quickly, then the coolant will not have time to heat up. A mathematical model of the system was compiled from a plant condenser and a boiler with heated water, a dependence on the speed of the coolant (antifreeze) and the temperature difference at the inlet and outlet of the accumulator was revealed.

Keywords: heat accumulator, temperature control, shell-and-tube heat exchanger, optimal regulator, freon